A simple way to control up to three garage doors or gate operators is to use the new GDR-27 MLT three button visor remote control. This remote can work with any operator that has a square green, orange, purple or round yellow learn button for programming. The yellow learn button is for openers made after 2011 only. The programming process is easy, and you can follow the detailed instructions that come with your order.
Order includes a compatible remote, visor clip, installed battery and programming instructions.
The three button multi-learn visor remote is a compatible replacement remote for garage door openers using learn buttons on the power head of the motor unit that is attached to the ceiling in the garage.
1. Use the visor clip to press the program button on the back of the remote until the LED light on the front of the remote turns on.
2. Press and release the learn button on the motor unit hanging in the garage.
3. Press and release the handheld remote button to program it by pressing it the number of times as indicated below for your learn button color.
4. To exit the programming use the visor clip to press the program button on the back of the remote again. The LED will go off.
5. To test, press the remote button on the face of the remote control.
* Repeat the above steps for each of the two additional remote buttons as needed.
A. Press and release the remote button to program 1 time for Yellow learn buttons.
B. Press and release the remote button to program 2 times for Purple learn buttons.
C. Press and release the remote button to program 3 times for Red or Orange learn buttons.
D. Press and release the remote button to program 4 times for Green learn buttons.